EasyManua.ls Logo

Crutchfield 019 0021 - User Manual

Default Icon
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
2-4 Factory Radio Removal
5 Receiver Installation
6 Front Pillar Speakers
7 Center Dash Speaker
8-9 Door Speakers
10-11 Rear Deck Speakers
12 Trunk Subwoofer
13 Wire Splicing Guide
019 0021
Revision 05/08/18
Page
Small Flat Blade
Screwdriver
*0000190021*
2015-
Ford Mustang
Socket, Ratchet
& Extension
Panel Tool
Tools Required
D
Inside...
IMPORTANT
Although reasonable attempts are made to verify the accuracy of the information contained in this MasterSheet, it is presented without
warranties or guarantees of any type due to the constantly changing nature of this type of information and running changes in vehicle
production. Any person or entity using this information does so at his or its own risk. If you find our instructions are different from your
vehicle, or if you have questions, do not continue with your installation. Contact our toll-free technical support for assistance.
Before starting, compare items on your invoice with items received.
Carefully check through packaging material. If any item is missing,
please call Crutchfield Technical Support at 1-800-955-9094.
Note: At this time, no aftermarket antenna is available from Crutchfield.
A replacement antenna may be purchased from a local dealership.
D
D
D
D
D
D
D
Copyright 2018 Crutchfield Corporation
D
7mm 10mm
Drill & 1/8” Bit
D
D
Needle-Nose
Pliers
DD
IMPORTANT: Disconnect negative battery cable before all operations
in order to avoid an electrical short or accidental airbag deployment.
D
8mm
D
Torx Driver
T40T20
Wire Strippers
& Crimp Caps
D
DD
D
1/2”
D
D
Question and Answer IconNeed help?

Do you have a question about the Crutchfield 019 0021 and is the answer not in the manual?

Summary

Factory Radio Removal

Receiver Installation

Front Pillar Speakers

Center Dash Speaker

Door Speakers

Rear Deck Speakers

Trunk Subwoofer

Wire Splicing Guide

CRIMP METHOD

Using crimp caps to connect speaker wires to the factory harness.

SOLDER METHOD

Using soldering iron and tape to connect speaker wires to the factory harness.

Crutchfield 019 0021 Specifications

General IconGeneral
BrandCrutchfield
Model019 0021
CategoryCar Stereo System
LanguageEnglish

Related product manuals