15
Storing instructions
1. Unplug unit, assemble clean, dry parts before storing.
2. Store the juice extractor in its box in a clean, dry place. Never store it while it is hot or
still plugged in.
3. Store the food pusher in the feed tube of the lid.
4. Never wrap cord tightly around the appliance. Do not put any stress on the cord where
it enters the unit; while holding the cord perpendicular to the unit, push inwards slowly
to store it inside the base of the unit.
Troubleshooting
Symptom Possible correction
The juice extractor will not
turn on
• The juice extractor is equipped with a safety system that
prevents the extractor from being turned on unless the unit
is completely and properly assembled.
• Turn the speed dial to Power (OFF). Check to make sure
the blade basket is properly seated.
• Make sure the safety locking bar is securely locked into place
on the top of the lid. (see figure 6.) The lid must be bared
securely into place or the juice extractor will not turn on.
Excessive noise or
vibrations, unpleasant odor,
appliance is hot to the
touch, or the juice extractor
smokes after it is turned on.
• Unplug the unit immediately. Take the juice extractor
to a qualified appliance repair technician for servicing.
To Next Page
