Do you have a question about the Crux SWRVL-54 and is the answer not in the manual?
Brand | Crux |
---|---|
Model | SWRVL-54 |
Category | Automobile Accessories |
Language | English |
Preserves original vehicle features when installing an aftermarket radio.
Maintains steering wheel control functionality via a pre-programmed interface.
Supports both amplified and non-amplified audio systems for broad application.
Features EIA color-coded wiring for simplified and accurate installation.
Lists compatible Volvo models (S40, S60, S80, V40, V70, XC70, XC90) and their years.
Module is compatible only with CAN based vehicles (2nd Generation / Type P26).
Not compatible with LIN bus or Fiber-optic systems; verification is required.
Includes the primary VL-54 interface module and its corresponding wiring harness.
Illustrates the module's wiring connections to an aftermarket radio and factory harness.
Details the application of 3.5MM SWC cables (Option A or B) for steering wheel control integration.
Guides setting DIP switches based on the aftermarket radio brand for SWC functionality.
Explains Option A (Blue/Yellow wire) and Option B (3.5mm plug) for different radio brands.
Specific wiring and programming steps for BOSS radios to enable SWC functionality.
Recommends using a standard relay for applications demanding over 2A continuous output.