Crystal Mountain Crystal Pro - Page 6

6
The Crystal Pro Water Dispensers come completely assembled and ready for set up and operation
either with, or without, installation of reverse osmosis or ltration cartridges.
Remove the dispenser from the box, saving the box and the packaging materials. The carton con-
tains the following items:
Qty Item
1 Crystal Pro Water Dispenser
1 M4 X 30 Tamper-proof Screw
1 M6 X 60 Expansion Bolt (220V units only – for CE compliance)
1 User Manual
Inspect the exterior for any damage which may have occurred during shipment.
1) To inspect the interior, remove the ltration service panel.
2) Visually inspect for any wires, tubing, or ttings which may have come loose during shipment.
3) Record the model and serial numbers below for future reference.
Record your Crystal Pro model number here:
Serial Number:
Date purchased:
Date installed:
Products oered and marketed by Crystal Mountain and its aliates are protected by patents is-
CR S P 3 K H K
1
C
Description
Reservoir
Type of lid
No. of
Faucets
Body color
Temp.
Options
Lid color
Voltage
Any 1-2
Alpha-
numeric
Characters
Crystal Pro
S = Stainless
Steel Reservoir
P = POU
3 = 3
K=Black
H=Hot, Cold
&Ambient
K =Black
1 = 110v-115v
C= Made
in China
Features & Benets