Crystal Mountain Crystal Pro - Features & Benefits; UV Light System; Leak Detection System

5
Thank you for purchasing the Crystal Mountain Crystal Pro Water Dispenser. The Crystal Pro brings a
fresh approach and a new look to point-of-use water dispensers. The system's contemporary color
scheme complements every oce environment. There are no bottles to change and the supply is virtu-
ally unlimited.
Hot, Cold & Ambient Dispenser
Your Crystal Pro Water Dispenser will provide up to 0.3 gallons (1.2 L) of hot water from a stainless steel
reservoir using a 450 watt heating element. A bi-metal limiter is provided to prevent overheating and
can be manually reset. The hot water is factory pre-set to 181°F (83 °C). Cold water is chilled with a high
capacity compressor using R134 refrigerant. An electro-mechanical thermostat controls the tempera-
ture of the water in the one gallon (3.8 L) stainless steel reservoir. The cold water temperature is facto-
ry preset to a nominal 41°F (5 °C)
UV Light System
All models of the Crystal Pro dispensers are tted with a UV-C band light system at the point of dispens-
ing and built into the ambient reservoir lid. This system is used to inhibit the growth of bacteria. When
dispensing Ambient or Cold water you will notice a pulsating “UV INSIDE” light which indicates the UV
light system activation.
Leak Detection System
All models of the Crystal Pro are tted with a leak detector. This system will generate an audible alarm
and front panel light alert upon detecting water in the base of the unit. In addition, the system will au-
tomatically shut o the incoming water supply to prevent further damage.
Filtration System (not included)
Crystal Pro dispensers are designed to be used with reverse osmosis, or carbon ltration. For locations
where a drain is not present, a ltration-only option is recommended.
Internal Storage Reservoir
An internal storage reservoir eliminates the need for an external storage tank. The internal compart-
ment is large enough to contain most water treatment systems. A oat mechanism guards against over-
ows.
Mechanical Components
All water connection ttings are compliant with NSF Standard 61. The Crystal Pro connects to the water
supply using a 1/4"female bulkhead tting. The molded panels are made from recyclable ABS plastic.
Features & Benets