2 V1.02
!
FUNCTIONS
Seite
Please read prior to initialization! 2
Purpose of the pressure rig 3
Mounting of the device 3
Mounting of the sensor 3
Alignment of the sensor 3
Removal of the sensor 3
Assignment of the items 4
List of items 5
Alignment of the sensor 5
Ordering data 6
Please read before initialization!
Attention: Recommended for measurement from 10 bar to 50 bar .
Please observe measuring ranges of the sensor!
The sensor has to be screwed-in pressure-tightly.
The manufacturer cannot be held liable for any damage which occurs as a result of non-
observance or non-compliance with these instructions. Should the device be tampered with
in any matter other than a procedure which is described and specified in the manual, the
warranty is cancelled and the manufacturer is exempt from liability.
The device is destined exclusively for the described application.
CS Instruments GmbH & Co.KG offers no guarantee for the suitability for any other purpose
and is not liable for errors which may have slipped into this operation manual. CS Instru-
ments GmbH is also not liable for consequential damage resulting from the delivery, capabi-
lity or use of this device.
To Next Page
Loading...
Need help?
General
