ITEM # QTY PART # DESCRIPTION
1 1EA CS10-XXX-XXX* DIGITAL REPEATER
2 1EA 453-1010-002 5V/24V POWER SUPPLY
3 1EA 780-0510-001 LINE CORD (AC POWER)
4 1EA 750-2171-001 MOUNTING PLATE (OPTIONAL)
5 1EA 750-2172-002 P/S MOUNTING BRACKET
*CS10-380-400 = CSI-DSP85-C
CS10-400-400 = CSI-DSP85I-C
CS10-381-401 = CSI-DSP85-P
CS10-401-401 = CSI-DSP85I-P
Wall Mounting the Digital Repeater
The following diagram illustrates the best method for mounting the repeater to a wall in an typical installation.
Note: for optimal cooling the unit should be mounted vertically on a wall with the antenna ports up.
- 13 -
Warning: Power supply cable connectors are keyed for proper orientation, but
if forced can be inserted incorrectly. Great care should be taken to
avoid this as it may damage the connectors and/or the repeater.
Keyed for proper
alignment, do not
force connector
into place.
To Next Page
Loading...