CST/BERGER CST300R Series User Manual

CST300R Series
2 & 5 Sec. Reflectorless
Total Stations
Collimator
Focus Ring
Eyepiece
USB Data Port
SD Card
RS-232 Port
Horizontal Tangent
Screw
Battery
Object Lens
Vertical Clamp
Screw
Keyboard
Display
Tribrach Leveling
Screw
Tribrach Clamp
Plate Vial
Tribrach Leveling Screw
Circular
Optical Plummet
Instrument Center
and HI Mark

CST/BERGER CST300R Series Specifications

General

Model	CST300R Series
Category	Measuring Instruments
Operating Temperature	14°F to 122°F (-10°C to 50°C)
Self-Leveling Range	±5 degrees
Laser Diode	635 nm, Class II
Rotation Speed	600 RPM
Dimensions	160 x 160 x 160 mm

Summary

Getting Started and Key Functions

Key Functions Overview

Details key instrument functions including power, menu access, measurement modes, and soft key assignments.

Quick Measurement and Stake Out

Guides users through initial setup and basic measurement modes like Angle, Angle/Distance, and Stake Out.

Basic Instrument Setup Procedures

Describes initial instrument configuration steps, including setting measurement units and tilt sensor parameters.

Creating and Storing Job Data

Covers the procedure for starting data collection, entering job details, and saving measurement data to a job file.

Data Transfer Methods

Downloading Data via USB

Step-by-step guide for transferring data from the Total Station to a PC using a USB cable and transfer software.

Downloading Data via SD Card

Details the procedure for exporting data to an SD card, including file format selection and naming.

Recommended Accessories and Kits

Keypad and Display Screen Elements