Need help?Do you have a question about the CST/BERGER CST205 and is the answer not in the manual?
General| Model | CST205 |
|---|---|
| Category | Measuring Instruments |
| Type | Automatic Level |
| Magnification | 20x |
| Compensator Range | ±15' |
| Stadia Ratio | 1:100 |
| Image | Erect |
| Operating Temperature | -20°C to +50°C |
| Compensator | Air-damped |
| Circular Level | 8'/2mm |
| Focusing Range | 0.3 m to infinity |
| Dimensions | 140mm x 140mm x 210mm |
General warnings for safe instrument operation, power supply, and tripod use.
Precautions regarding water, dust resistance, and general instrument usage.
Illustrates the instrument's operational modes and transitions.
Procedures for charging, cautions, and charger operation.
Steps for leveling and centering the instrument using various methods.
Instructions for focusing the reticle, sighting targets, and eliminating parallax.
Procedures for measuring horizontal angles and setting references.
Configuring EDM settings, signal checking, and data output.
Inputting and recalling instrument station coordinates from keyboard or memory.
How to set the backsight azimuth angle for orientation.
Determining target coordinates in three dimensions using various data.
Staking out points using distance and angle references with guidance.
Setting out points based on known coordinates, calculating differences.
Measuring distances and angles between multiple points without moving the instrument.
Measuring vertical distances to inaccessible objects like power lines.
Calculating station coordinates using two known points with measurement process.
Calculating station coordinates using multiple known points and error analysis.
To Next Page
