CST/BERGER CST205 - 20．2．2 Inputting Coordinate Data of Known Point from an

20.2.2 Inputting coordinate of known point from an external equipment
By running TS communication software on a PC, coordinate data of known points can
be entered and edited, and then sent to the total station. Before the attempting
communication, set the communication parameters following the communication
protocols.
Ke
y
s Dis
p
la
y
O
p
eratin
g
1. Connect the total station and computer.
Run TS-link communication software
on PC.
2． Select “2.Known data” in the memory
mode and press 【
】.
【】
【】
【
】
KNOWN DATA
1.Key in coord.
2.Comms input
3.List
4.Del all
3. Select “2.Comms input” and press
【 】.known point coordinate data
Known data
starts to be transferred from PC and the
number of received items is displayed on
the screen.
Transferring…
z Press 【STOP】to stop data reception in
progress.
【】
Received： 45
【】
【
】
STOP
75