12．COORDINATE MEASUREMENT
Using the coordinate measurement application will enable the user to determine the
3-dimensional coordinates of a target position based on the Inst. Stn., Inst. Hgt., Tgt.
Hgt., and back sight data.
EDM setting should be done before coordinate measurement.
（Please see “11.1 EDM settings”）.
12.1 Inputting instrument station coordinates
• Ensure that the instrument station, back sight station or angles are set prior to
taking any measurements.
• To accurately determine Heights, make sure that the Instrument Height and Target
Height are also set prior to taking any measurements.
29
To Next Page