CST/BERGER CST205 - 10．4 ％ Slope

10.4 ％ Slope
The total station can display the % slope as well as vertical angle.
Before this operation, you should define the【A/%】 in the Meas mode. See “22.3.1
Defining Softkeys”.
O
p
eratin
g
Ke
y
s Dis
p
la
y
1. Press【A/%】，the % slope of the
vertical angle will be displayed on ZA line
MEAS
as pictured to the right.
H
ZA -17.128 %
【A/%】
HAL 239°38′48
″
P1
DIST SHV A/% EDM
2． Press 【A/%】once again to display
the normal vertical angle mode as
MEAS
pictured to the right.
H
【A/%】
ZA 99°43′13
″
HAR 239°38′48
″
P1
DIST SHV A/% EDM
z The range of % slope can be displayed： ±300％
z When the vertical angle setting “horizontal 0”，“ZA”will display“VA”。
21