Need help?Do you have a question about the CST/BERGER LM30 and is the answer not in the manual?
General| Model | LM30 |
|---|---|
| Category | Measuring Instruments |
| Type | Laser Level |
| Measuring Range | Up to 30 meters |
| Laser Class | Class II |
| Laser Type | 635 nm, <1 mW |
| Self-Leveling | Yes, ±4° |
| Warranty | 2 years |
| Accuracy | ±3 mm at 10 m |
| Power Source | Battery |
| Units of Measurement | Metric |
| Storage Temperature | -20°C to +50°C (-4°F to 122°F) |
Procedure to check for and measure horizontal rotation error in the laser.
Steps to adjust the laser leveling screws to correct horizontal rotation error.
Procedure to check for and measure vertical rotation error in the laser.
Steps to adjust the laser leveling screws to correct vertical rotation error.
To Next Page
