3.2 Power Connection
1.Connect the AC adapter to power receptacle.
2.Connect the power cord to AC adapter.
3.Connect the other end of power cord to the outlet.
Caution
：
⚫ Use the original power adapter only. Avoid the damage caused by charging improperly.
⚫ Please unplug the printer power cord if it is not in use for a long time.
3.3 Peripherals Connection
3.3.1 Interface Cable Connection
1.The standard for the printer’s interface cable shows as follows:
- USB A-Type cable
- USB B-Type cable
- RS-232C cable
- RJ45 cable
2.Based on your own need, follow the instructions to connect the cable.
1) Make sure the printer’s power is off.
2) Please plug in the cables.
-Insert the USB A-Type cable into the USB (type A) interface.
-Insert the USB B-Type cable into the USB (type B) interface.
-Insert the RS-232C cable into the serial interface.
-Insert the RJ45 cable into the ethernet interface.
To Next Page
Loading...
General