GH DRIVER
Thank you for purchasing GH series servo driver produced by Beijing CTB Servo Co., Ltd. The GH series
AC servo driver is a high-quality, multi-functional and low-noise AC servo driver that was researched,
developed and manufactured by Beijing CTB Servo Co., Ltd. The driver is servo driver for AC induction
motor (IM) and AC permanent magnet synchronous motor (PM). It can control the position, speed,
acceleration and output torque of various AC servo motor appropriately.
In command to achieve control functions of various machine tools, GH series AC servo driver is
equipped with dual 32-bit CPU and abundant control function module. It can be conveniently
connected with various domestic and foreign CNC systems through standard control interfaces to
allow full play for function of CNC system. The characteristics of torque, acceleration and deceleration,
precision and efficiency of machine tool which is equipped with GH series AC servo driver are
remarkable, and accurate stop, C-axis, rigid tapping, electronic shift, multi-axis synchronization and
other functions can be realized easily.
As the first choice of driving product of various machine tool power shaft, GH series AC servo driver can
be widely used for drive of product such as CNC milling machine, vertical machining center, horizontal
machining center, CNC boring machine, CNC lathe, vertical lathe, heavy horizontal lathe and gantry
machine tool.
For proper application, please read the manual carefully before using the GH series AC servo driver.
Abnormal operation, fault or reduction of service life, and even personal injury accident may be caused
by inappropriate use. Therefore, the manual shall be read repeatedly before use, and operate in
strict accordance with the instructions. The manual is attachment with the equipment. Please keep it
properly after using for future repair and maintenance of the driver.
Preface
01
To Next Page
