CTcoin Dolphin - Page 15

14
The last group is that of system errors, mainly of internal sensors. If the suggested
remedy does not work, please contact your service.
CHECK HOPPER
SENSOR
During power on notes were detected on the hopper or
hopper sensor defect or extremely dirty.
CHECK STACKER
SENSOR
During power on notes were detected in the stacker or
stacker sensor defect or extremely dirty.
CHECK SPEED
SENSOR
Speed sensor dirty, obstructed or defect. Synchronisation
wheel blocked or loose or motor main motor defect.
CHECK UPPER
LEFT IR
The optical path between lamp and sensor is blocked.
Clear the paper path.
CHECK UPPER
RIGHT IR
The optical path between lamp and sensor is blocked.
Clear the paper path.
CHECK LOWER
LEFT IR
The optical path between lamp and sensor is blocked.
Clear the paper path.
CHECK LOWER
RIGHT IR
The optical path between lamp and sensor is blocked.
Clear the paper path.
MESSAGE ERROR
Display software error or no software on main board.
This message will be replaced by INTERNAL ERROR
INTERNAL ERROR
Display software error or no software on main board.
Error messages and the content of these instructions are subject to change.
For latest news and update : www.ctcoin.com