7
start counting, press the START / RESET button.
ADD keeps a total of the number of notes counted. See chapter ‘Operation’
for details.
CLR deletes the number of counted notes and the batch-counting preset. In
ADD mode, it clears the total of counted notes as well.
CUR toggles between different currentcys (see the symbol in the display) and
no preset of sensors (No special currency setup)
MIX toggles between Mixed Value counting and Single Denomination Value
counting. In Mixed note counting all denominations are valued and accepted
to the total. After the counting the notes, the display will show the total value
and value & number of each denomination. To see all the counted
denomination it can be necessary to use the 0 button to scroll between the
denominations.
VAL toggles between Mixed Note Value Counting and Single Denomination
Non-Value counting. In Single Denomination Value Counting all notes
deviating from the first (bottom) note of the batch to be counted are rejected.
If the machine is a MIX note machine there will not be a button for VAL, to
use VAL function the MIX button must be pressed for 3 seconds.
This intelligent machine offers use of presets, automatic clearing of the display or
accumulating counting, automatic starting of the counting process and batch
control if you need a certain amount of money or you want to bundle the notes.
An automatic feature stops the machine after counting 200 notes without
emptying the stacker to avoid overfilling of the stacker and jammed notes.
To Next Page
Loading...