Need help?Do you have a question about the CTEK 1018 and is the answer not in the manual?
General| Input Voltage | 100-240 V AC |
|---|---|
| Input | 50/60 Hz |
| Weight | 0.8 kg |
| Back Current Drain | < 1 mA |
| Ambient Temperature | -20°C to +50°C |
| Insulation Class | IP65 |
| Type | Battery Charger |
| Battery Types | Lead-Acid, AGM, GEL, Calcium |
Warning about chemicals known to cause cancer or reproductive toxicity.
Manual contains important safety and operating instructions for model 1018.
Batteries generate explosive gases; follow instructions to prevent explosion risk.
Advice for working near batteries, handling acid, and avoiding sparks.
Steps for removal, cleaning, adding water, and checking voltage.
Placement away from battery and ensuring ventilation.
Position cords to avoid damage and stay clear of moving parts.
Connecting clips for negative-grounded vehicles.
Connecting clips for positive-grounded vehicles.
Steps for safely disconnecting the charger.
Steps for external battery connection.
Cannot restore worn batteries; identifies potential faults and causes.
Mode 14.4V for wet/Gel batteries.
Mode 14.7V for cold/AGM batteries.
Mode 13.6V for maintenance, suppresses spark protection.
Mode 15.7V for deep discharged batteries.
Connect power, select mode, interpret lamps.
Safely stop charging by disconnecting power.
Initial phases for sulphated batteries.
Primary charging phase.
Final charging and measurement phase.
Float and pulse maintenance to keep battery healthy.
Explains meaning of indicator lamps and mode buttons.
Conditions leading to error mode and how to reset.
Voltage, current, ripple, and drain specifications.
Temperature, cooling, capacity, and dimensions.
Recommended AWG sizes for AC extension cords.
Instructions for connecting battery cables with eyelet terminals.
CTEK Power Inc's 5-year limited warranty against defects.
To Next Page
