Need help?Do you have a question about the CTEK MULTI XS 25000 and is the answer not in the manual?
General| Charge Current | 25 A |
|---|---|
| Battery Capacity | up to 500 Ah |
| Protection Class | IP65 |
| Insulation class | Class II |
| Input Voltage | 100-240 V |
| Input | 100-240V AC, 50-60Hz |
| Charging voltage | 14.4/14.7 V |
| Protection Features | Short circuit, reverse polarity |
| Compatibility | Lead-acid batteries, Gel, AGM, Calcium |
| Charging Method | 8-step, fully automatic charging cycle |
Essential safety guidelines for using the battery charger and handling batteries, including protective measures.
Step-by-step guide for connecting the charger to a vehicle battery, including grounding and polarity.
Instructions for connecting the charger to a battery that is not installed in a vehicle.
Procedure for initiating the charging process and understanding indicator lamps.
Pulse-based recovery for sulphated batteries, indicated by lamp 1.
Initial charging phase with limited current until voltage rises.
Main charging phase delivering maximum current until voltage reaches set level.
Completes charging by maintaining voltage and tapering current.
To Next Page
