Need help?Do you have a question about the CTEK MULTI US 7002 and is the answer not in the manual?
General| Output Current | 7 A |
|---|---|
| Maintenance Charging | Yes |
| Protection Class | IP 65 |
| Back Current Drain | < 1 mA |
| Ripple | <4% |
| Ambient Temperature | -20°C to +50°C |
| Output Voltage | 14.4V / 14.7V |
| Battery Capacity | Up to 150 Ah |
| Battery Types | AGM, Gel |
| Protection Features | Reverse polarity |
| Input Voltage | 100-240V AC, 50/60Hz |
| Charging Modes | 8 step fully automatic charging cycle |
Manual contains important safety and operating instructions for model 1018.
Precautions to take when working near lead-acid batteries to avoid injury.
Guidelines for safely positioning the charger relative to the battery.
Precautions to take before connecting and disconnecting DC clips.
Explanation of Normal, AGM/Cold, Supply, and Recond modes.
Details on the Supply mode, its voltage, current, and use cases.
Details on the Recond mode for reconditioning severely discharged batteries.
Table showing estimated bulk charging times for different battery sizes.
Recommended AWG sizes for AC extension cords based on length.
Information about the included battery cables and their connection.
To Next Page
