CTEK XS 0.8 User Manual

EN
EN • 3
12V/0.8A
XS 0.8
ERROR LAMP
FULLY CHARGEDREADY TO USE
POWER LAMP
CHARGING
1. Connect the charger to the battery.
2. Connect the charger to the wall socket. The power lamp will indicate that the mains
cable is connected to the wall socket. The error lamp will indicate if the battery clamps
are incorrectly connected. The reverse polarity protection will ensure that the battery
or charger will not be damaged.
3. Follow the 6-step display through the charging process.
The battery is ready to start the engine when STEP 3 is lit.
The battery is fully charged when STEP 5 is lit.
4. Stop charging at any time by disconnecting the mains cable from the wall socket.
CONGRATULATIONS
to the purchase of your new professional switch mode battery charger. This charger is
included in a series of professional chargers from CTEK SWEDEN AB and represents the
latest technology in battery charging.
CTEK COMFORT CONNECT – eyelet M6
12V/0.8A
XS 0.8
CTEK COMFORT CONNECT
MAINS CABLE
CTEK COMFORT CONNECT – clamp
CHARGE CABLE
SUPPLY PLUG*
*Supply plugs may differ to suit your wall socket.
MANUAL
20014896E XS 0.8, Manual EU, Print file 002.indd 3 2011-06-21 10:43:27

CTEK XS 0.8 Specifications

General

Input voltage	220-240 V
Input frequency	50/60 Hz
Battery voltage	12 V
Cable color	Black
Operating temperature (T-T)	-20 - 50 °C
Number of batteries supported	-
Product color	Black, Silver

Weight and Dimensions

Depth	145 mm
Width	55 mm
Height	38 mm
Weight	400 g