EasyManua.ls Logo

CTEK MULTI XT 4000 - Technical Specification; Manufacturers Declaration

CTEK MULTI XT 4000
9 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
any implied warranty including any warranty for consequential damages. This is the only
expressed limited warranty and CTEK SWEDEN AB neither assumes nor authorizes anyone to
assume or make any other obligation towards the product other than his limited warranty.
TECHNICAL SPECIFICATION
Model 1008
Voltage AC 170–260VAC, 5060Hz
Back current drain* < 1mA
Voltage Charging Voltage Nominal: 24V
28.8V; 29.4V or 31.4V
Ripple** Max 5% rms
Current 4A max
Ambient Temperature -20°C to +5C, power is reduced automatically at
increased ambient temperature.
Cooling Natural convection.
Charging cycle MULTI XT 4000 is a multi stage fully automatic charger
Type of batteries All types of 24V lead-acid batteries (Wet, MF, AGM and GEL).
Battery Capacity 8–100Ah
Dimensions 191 x 89 x 48 mm (L x W x H)
Insulation IP65***
Weight 0.8kg
*) Back Current Drain is what the charger uses to drain the battery if the power cord is
disconnected.
**) Quality of the current and voltage are very important. High current ripple heats up the
battery and makes the positive electrode age prematurely. High voltage ripple could harm
other equipment connected to the battery. MULTI XT 4000 produces a high quality current and
voltage with very low ripple.
***) If the power connected is the flat European contact type, the battery charger has insulation
class IP63, except in Switzerland where IP65 is valid.
MANUFACTURER’S DECLARATION
CTEK SWEDEN AB, Rostugnsvägen 3, SE-776 70 VIKMANSHYTTAN, SWEDEN. Declares un-
der sole responsibility that the battery charger MULTI XT 4000, to which this declaration relates
is in conformity with the following LVD standards: EN60335-1, EN60335-2-29 according to the
terms of directive 73/23/EEC with the addition of 93/68/EEC. This product also is in agreement
with the following EMC standards: EN61000-3-3, EN61000-3-2, EN55014-1 and EN55014-2
according to the terms of directive 89/336/EEC with the addition of 92/31/EEC and 93/68/EEC.
The charger comes in different models with different types of electrical plugs. The charger with
WKHÀDWHXURFRQQHFWRULVLQWHQGHGIRU6ZLW]HUODQG
VIKMANSHYTTAN, SWEDEN 2006-01-23
Börje Maleus, Managing Director
CTEK SWEDEN AB,
Rostugnsvägen 3
SE-776 70 VIKMANSHYTTAN, SWEDEN
Fax: +46 225 30793
www.ctek.com

Related product manuals