Need help?Do you have a question about the CTS VRG5-31412 Series and is the answer not in the manual?
Covers command modes, prompts, general commands, and quick keys in the CLI.
Details entering Global Configuration mode and sub-configuration modes for various settings.
Covers basic gateway settings including WAN, LAN, DHCP, and routing configurations.
Manages private network settings, including LAN IP, DHCP server, and reservation.
Configures wireless network settings, including setup, security, and advanced options.
Sets up a wireless network for the Residential Gateway, covering 5G and 2.4G bandwidths.
Configures authentication methods (WEP, WPA, WPA2, WPA-Mixed) for wireless connections.
Configures firewall, packet filter, URL filter, VPN passthrough, UPnP, and DDoS prevention.
Enables or disables firewall protection, inspecting packets from public to private networks.
Filters unwanted packets based on IP, MAC address, or application protocol using WAN, LAN, MAC, and Application filters.
Allows external access to internal servers by redirecting incoming traffic to specified private IP addresses and ports.
Manages device access, interface settings, time, logs, user privileges, backup, factory defaults, and firmware upgrades.
Upgrades the gateway's firmware using TFTP, FTP, or HTTP protocols for updates and new features.
To Next Page
General
