22
using battery power in order to save power if no
previous device or new device is found.
This feature is added for convenience, assuming
there is a single host device.
Upon successful pairing, the Bluetooth icon will stop
blinking and become solid.
If VK200 KEYFOB
®
cannot locate the last 3
previously paired host device or a new device within
120 seconds, it will disable the Bluetooth and the
Bluetooth icon will disappear when using only
battery power. Turn the device off and on in order to
re-start the pairing or press FN and B on the VK200
KEYFOB
®
Keyboard or go into the menu screen then
settings screen and turn it back on.
3. Upon successful pairing, the Bluetooth icon will stop
blinking and become solid.
Please refer to the host device manual for pairing
instructions.
4. After successful pairing to the host device the
keyboard function is the default mode.
To Next Page
Loading...