Need help?Do you have a question about the CTX QXB0005101CT and is the answer not in the manual?
General| Brand | CTX |
|---|---|
| Model | QXB0005101CT |
| Category | Controller |
| Language | English |
Read warnings for safe installation, use, and maintenance. Store manual for future reference.
Unit intended only for its purpose; other uses are dangerous and void warranty.
Follow all indications for operator safety, power correctly, use specified accessories.
Protect from liquids, avoid hazardous environments, and switch off if liquid penetrates.
Details display, CPU, memory, interfaces, power supply, casing, and weight.
Details safety, alarms, display, archive, graphs, password, language, and protocol.
Guidelines for electrical installation and connecting external devices.
Initial configuration for language, date/time, and enabling/disabling the instrument.
Steps to access and configure setpoints for output relays.
How to set setpoint values and activate pump priming for relays.
Setting output modes like Recorder or Setpoint for 4-20mA outputs.
Configuring setpoint values, window width, and alarm for Setpoint+Alkaline mode.
Step-by-step guide for calibrating the pH probe using buffer solutions.
Performing the second point calibration for pH probes with buffer solutions.
Steps to upload and install new firmware using a USB memory stick.
How to reset the instrument to its default factory settings.
To Next Page
