This document is an operator's manual for the Cub Cadet Electric Bed Lift, Model 39A-212-100. It provides detailed instructions for the installation and initial operation of this accessory, designed to enhance the functionality of a Cub Cadet 4x4 utility vehicle.
Function Description
The Electric Bed Lift is an accessory that allows for the powered raising and lowering of the utility vehicle's bed. This feature significantly improves convenience and efficiency when accessing the engine compartment, performing maintenance, or loading/unloading cargo, eliminating the need for manual lifting and support. The system is operated via a dash-mounted switch, providing easy control over the bed's position.
Important Technical Specifications
The manual does not explicitly list detailed technical specifications such as voltage, current draw, or lifting capacity. However, it provides crucial information regarding the necessary components and hardware for installation:
- Model Number: 39A-212-100
- Required Accessory: Optional Electric Wiring Harness (39A-209-100) is mandatory for the installation and operation of this bed lift unit. Without this harness, the bed lift cannot be installed or function.
- Mounting Hardware:
- Four self-tapping 3/8-16 screws for mounting the upper bed lift assembly plate to the utility vehicle's bed.
- Two 1/2-13 x 1.25 bolts with two 1/2-13 lock nuts for securing the lower portion of the bottom bed lift assembly plate to the vehicle's lower frame.
- Four 5/16-18 x 1.00 bolts with flat washers and four 5/16-18 hex lock nuts for mounting the top portion of the lower bed lift assembly plate to the frame's cross-member.
- Clevis pins and cotter pins are used for securing the mounting assemblies to the bed lift unit and for attaching the bed lift motor.
- Electrical Connection: The bed lift switch connects to a specific plug on the electric accessory harness, identified by yellow/white, orange, and orange/white wires. Users are advised to consult the electric accessory harness manual for color-coded plug confirmation.
Usage Features
The Electric Bed Lift offers several key usage features designed for user convenience and safety:
- Powered Operation: The primary feature is the ability to raise and lower the utility vehicle's bed electrically, controlled by a dash-mounted switch. This eliminates manual effort and provides precise control over the bed's position.
- Dash-Mounted Switch: A dedicated switch, included with the kit, is installed into the dashboard. While the upper left position is recommended, any available dash plug position can be used, offering flexibility in placement.
- Easy Installation: The manual provides step-by-step instructions for installation, including detailed diagrams (Figures 1-1, 1-2, 1-3, 1-4, 1-5) to guide the user through each stage, from mounting plates to wiring.
- Safety Precautions:
- Bed Latch Removal: It is explicitly stated as "IMPORTANT" that the bed lift latch handle must be removed before attempting to operate the electric bed lift. Failure to do so will result in serious damage to the accessory. The manual details how to remove the cotter pin, latch spring, and slide the bed latch out, advising users to retain this hardware for future needs.
- Wire Routing: Proper routing of the bed lift motor wire is emphasized as "IMPORTANT." The wire must be routed under and through the cross-frame and secured with tie-straps to protect it from coming into contact with the muffler. Sufficient slack must be left in the wire to accommodate the bed's movement when raised and lowered.
- Compatibility: The bed lift is designed specifically for Cub Cadet 4x4 units and requires the optional Electric Wiring Harness (39A-209-100) for full functionality.
- Testing Procedure: After installation, users are instructed to test the bed lift switch by pushing it up and down, observing the motor's operation. The final step involves fully expanding the unit and attaching the motor to the bed using a clevis pin and cotter pin. Manual adjustment of the bed's position may be necessary to align the holes.
Maintenance Features
The manual focuses primarily on installation and initial operation, with limited explicit details on long-term maintenance. However, some aspects can be inferred:
- Hardware Retention: Users are advised to retain the removed bed latch hardware (cotter pin, latch spring, washer, spacers) in a safe location in case of future needs, suggesting that the bed lift can be removed or serviced if required.
- Damper Removal (Optional): The bed damper may be removed during installation, but it is not mandatory and will not affect the operation of the electric bed lift accessory. This implies that the electric bed lift replaces or overrides the function of the manual damper.
- Wiring Integrity: The emphasis on proper wire routing and securing with tie-straps suggests that maintaining the integrity of the wiring is crucial for the bed lift's reliable operation and to prevent damage from heat or abrasion. Regular inspection of the wiring for wear or damage would be a recommended maintenance practice, though not explicitly stated.
- Referral to Owner's Manual: The manual repeatedly stresses the "IMPORTANT" need to refer to the Cub Cadet Owner's Manual for any information relating to the use of the 4x4 unit. This indicates that general maintenance guidelines for the vehicle, which may indirectly affect the bed lift, are covered in the main vehicle manual.
- Parts and Accessories: For parts and/or accessories, users are directed to an authorized Cub Cadet Dealer, providing a phone number (1-877-282-8684) and website (www.cubcadet.com) for locating dealers. This suggests that replacement parts for the bed lift would be available through official channels.
In summary, the Cub Cadet Electric Bed Lift (Model 39A-212-100) is a power-operated accessory designed to simplify the raising and lowering of a Cub Cadet 4x4 utility vehicle's bed. Its installation requires a specific wiring harness and involves careful routing of electrical wires, with a critical safety step of removing the manual bed latch before operation. While detailed maintenance instructions are not provided, the manual emphasizes proper installation and refers users to the main vehicle manual and authorized dealers for further support.
Need help?
General
To Next Page