Cub Cadet 59A40003727 User Manual

23
SECTION 11: MAINTENANCE
LUBRICATION
Daily
• Checkthelevelofhydraulicoilintractorbefore
starting each day’s operation. If necessary, add oil
as recommended in your tractor owner’s manual.
IMPORTANT: When adding oil to the tractor reservoir,
always use hydraulic oil as specified in the tractor
operator’s manual.
• Lubricateaftereveryeighthoursofoperation(See
Figure 30):
- Apply lubrication to the grease fitting in the hub
at the mast end (rearward end) of each boom
arm.
- Apply lubrication to the grease fittings at the
each end of both boom lift cylinders.
- Apply lubrication to the grease fitting in the hub
at the upper end of each bucket cylinder.
- Apply lubrication to the grease fittings in the
outer end of all four pivot pins of the loader
bucket.
GENERAL MAINTENANCE
After every eight hours of operation, check all hard-
wareandtightenwhererequired.
Replace hoses immediately if they are damaged by
a cut or scrape, extruded at the fittings, or leaking.
Hydraulic oil leaks should be repaired promptly to
avoid loss of oil and serious personal injury from
escaping oil.
LUBRICATION
Figure 30

Cub Cadet 59A40003727 Specifications

General

Brand	Cub Cadet
Model	59A40003727
Category	Front End Loaders
Language	English