Cub Cadet CC 760ES - Unfolding the Handle; Attaching the Shift Lever

Unfolding the Handle
Remove the star knobs and carriage screws from the lower 

2.

Reinstall the carriage screws and knobs removed earlier.
Tighten the upper and lower star knobs and carriage 4.
screws to secure the upper handle to the lower handle. See

The handle height can be adjusted to any of three 5.

Maintenance and Adjustments section of this manual.
Attaching the Shift Lever
Remove the screw and the lock nut that secures the shift 

Remove the remaining screw and nut from the lower shift 2.


aligning the holes in the lever with the holes in the shift

Secure the lever to the plate using the two screws and two 4.





10 se c t i O n 2 — as s e M b l y & se t -up