before attempting to operate this machine. Failure to comply with all safety rules and instructions may result in personal
injury.
Throttle / Choke Control
Note: When operating the mower with
the cutting deck engaged, be certain
that the throttle/choke control is in the
fast position.
The throttle / choke control is used to
adjust engine speeds, to activate the
engine choke and to stop the engine.
Always run engine with the throttle /
choke control lever in the fast position
for best mower performance.
Choke: Use when starting a cold engine
Fast: Use during mower operation.
Slow: Use when idling engine.
Stop: Stops the engine. (Non-electric
start units only).
Refer to Starting The Engine in the
detailed starting instructions.
Engine
engine-related controls and features.
Deck Height Lever
move the lever to the left, then place the lever in the notch best
suited for your application.
Controls and Features
4
12
To Next Page
Loading...
