8-15 Periodic Maintenance and Adjustment
NOTE:
Skip steps 4-6 if the oil filter cartridge is not
being replaced.
4. Remove the oil filter cartridge with an oil
filter wrench.
1. Oil filter cartridge 2. Oil filter wrench
NOTE:
An oil filter wrench is available at a nearby
service center.
5. Apply a light coat of engine oil to the
O-ring of the new oil filter cartridge.
NOTE:
Make sure the O-ring is seated properly.
1. O-ring
6. Install the new oil filter cartridge with an
oil filter wrench, and then tighten it to the
specified torque with a torque wrench.
To Next Page
Loading...
Need help?
General