4-14 Control Functions
Accelerator pedal
Press the accelerator pedal down to increase
engine speed. Spring pressure returns the
pedal to the idle position when released.
Always check that the accelerator pedal
returns normally before starting the engine.
1. Accelerator pedal
Before starting the engine, check the accele-
rator pedal to be sure it is operating smoothly.
Make sure the accelerator pedal fully returns
to the idle position as soon as it is released.
WARNING
POTENTIAL HAZARD
Malfunction of the accelerator pedal.
WHAT CAN HAPPEN
A faulty pedal that makes it difficult to
speed up or slow down could cause
loss of control.
HOW TO AVOID THE HAZARD
Check the operation of the accelerator
pedal before you start the engine. If
it does not work smoothly, check for
the cause. Correct the problem
before operating the vehicle. Consult
a service center if you can’t find or
solve the problem yourself.
To Next Page
Loading...
Need help?
General