Control Functions 4-15
Brake pedal
1. Brake pedal
Parking brake lever
The parking brake lever is located at the right
side of the driver’s seat. It will help hold the
vehicle from moving while parked.
To set the parking brake, pull the lever up
completely.
To release the parking brake, pull up on the
lever, press the release button, and then
push the lever all the way down. Spring
pressure helps return the lever to the
released position. Be sure to fully release the
parking brake before starting out, Failure to
do so may result in poor performance and
premature wearing of the rear brake and
V-belt.
To Next Page
Loading...