6-4 Operation
Warming Up
To get maximum engine life, always warm up
the engine before driving. Never accelerate
hard with a cold engine! To see whether or
not the engine is warm, check if it responds
to the throttle normally .
1. Release the brakes and press the
accelerator pedal gradually.
2. If the rotation rate of the engine
accelerates with pedal steadily, the
warming-up procedure is complete and
the vehicle can been driven.
Otherwise, go on with the third step.
3. Continue warming up the engine until it
idles smoothly.
CAUTION:
See the “Engine brea
k-in” section prior to
operating the engine for the first time.
Drive Select Lever Oper
ation And Driving
In Reverse
CAUTION:
Before shifting, you
must stop the UTV and
return the throttle lever to the closed position,
otherwise the transmission may be
damaged.
Shifting: Neutral to High and High to Low
1. Stop the vehicle. Keep your foot off the
accelerator pedal.
2. Apply the brakes, then shift by moving
the drive select lever along the shift
guide.
To Next Page
Loading...