Operation 6-5
NOTE:
Make sure that the drive select lever is
completely shif
ted into position.
3. Release the brakes and press the
accelerator pedal gra
dually.
Shifting: Neutral to Reverse
1. Stop the vehicle. Keep your foot off the
accelerator pedal.
2. Apply the brake pedal.
3. Shift from neutral to reverse or vice versa
by moving the drive select lever along
the shift guide.
NOTE:
● Apply the brakes first, before placing
gearshift lever to “reverse” position.
● In the brake pedal, there is a cable which
is connected to a position pin in the
gearshift assembly. When the brake
pedal is applied, the position pin will
release, and the gearshift can be moved
to the“reverse”position.
1.Position pin 2.Cable 3. Adjust