3
GENERAL SAFETY WARNINGS
CAUTION: Before using this charger, read this manual and follow all
Safety Rules and Operating Instructions.
This instruction manual includes the following:
• General Safety Rules
• Specific Safety Rules and Symbols
• Functional Description
• Assembly
• Operation
WARNING: Retain this manual for future reference.
Provide this manual to all operators and be certain that they have
read and understand all the Safety Rules and Operating Instructions prior
to their using this tool.
Please register your product online at www.cubcadet.com (in the United
States) or www.cubcadet.ca (in Canada).
WARNING: To avoid electrical hazards, fire hazards or damage to
the tool, use proper circuit protection.
The charger for this tool is wired at the factory for 120 V operation. It must be
connected to a 120 V, 15 A circuit that is protected by a time-delayed fuse or
circuit breaker. To avoid shock or fire, replace the power cord immediately if it is
worn, cut or damaged in any way.
OWNER’S REGISTRATION
ELECTRICAL SAFETY
To Next Page
Loading...