19
Product Care
4
† — After first 300 hours, change hydrostatic fluid and filter in transaxles.
* — Perform more frequently under dusty conditions.
Maintenance Schedule
Before
Each use
Every 25 Hours Every 50 Hours Every 500 Hours After Mowing
Check Gasoline Level
P
Check Hydraulic Hoses for Leaks
P
Check Tires & Tire Pressure
P
Check Deck, Mower & Hydro Drive Belts
P
Check Blades & Blade Bolt Tightness
P
Check Safety Switches for Proper Operation
P
Check Fluid Level in Transmission Oil Expansion Reservoir
P
Check/Clean Engine Intake Screens & Cooling Fans *
P P
Check/Clean Exhaust Manifold, Muer Pipe & Muer Shields *
P P
Check/Clean Top & Underside of Deck, Under & Around Spindle Covers
& Belt Area *
P P
Check/Clean Around Fuses, Wiring & Wiring Harnesses *
P P
Check/Clean Around Transmission, Axle & Fans *
P P
Blow Out/Clean the Pump Control Area Under Floor Pan
P
Blow Out/Clean the Pedal Control Area Under the Foot Rest
P
Lubricate Wear Points (See Chart)
P P
Clean Engine Cooling Fins & External Surfaces *
P
Change Hydrostatic Fluid & Filter in Transaxles †
P
To Next Page
Loading...
