Maintenance & Adjustments
6
25
† — After first 300 hours, change hydrostatic fluid and filter in transaxles.
* — Perform more frequently under dusty conditions.
Maintenance Schedule
Before
Each use
Every 25 Hours Every 50 Hours Every 500 Hours After Mowing
Check gasoline level
P
Check tires & tire pressure
P
Check deck, mower and hydro drive belts
P
Check blades and blade bolt tightness
P
Check safety switches for proper operation
P
Check uid level in transmission oil expansion reservoir
P
Check engine intake screen/cover
P
Clean mower
P
Blow out/clean the pump control area under oor pan
P
Blow out/clean the pedal control area under the foot rest
P
Lubricate wear points (see chart)
P P
Grease three spindle bearings
P
Clean engine cooling ns & external surfaces *
P
Lubricate all grease ttings (see chart)
P
Change hydrostatic uid & lter in transaxles †
P
To Next Page
Loading...
