EasyManua.ls Logo

Cub Cadet Ultima ZT Series

Cub Cadet Ultima ZT Series
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Safe Operation Practices • Assembly • Operation • Service And Maintenance
OperatOrs Manual
Form No. 769-25913A
(January 20, 2021)
Battery-Powered Lithium-Ion Zero-Turn
Tractor
Lapbar Steering & Drive Controls
NOTE: This Operators Manual covers several models. Features may vary by model. Not all features in this manual are
applicable to all models and the model depicted may differ from yours.
WARNING
Read and follow all safety rules and instructions in this manual before attempting to operate this
machine.
Failure to comply with these instructions may result in personal injury - SAVE THESE INSTRUCTIONS.
WARNING
CALIFORNIA PROPOSITION 65
Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
Record Product Information
Before setting up and operating your
new tractor, please locate the model
plate on the equipment and record
the information in the provided
area to the right. You can locate the
model plate by lifting up the seat
and looking under the seat pan. This
information will be necessary, should
you seek technical support via our
web site, Customer Support, or with a
local authorized service center.
Model Number
3 4 A 2 C S
Serial Number
English ......................................................................................................................................Page 2
Spanish (Español) ....................................................................................................................Page 31
Question and Answer IconNeed help?

Do you have a question about the Cub Cadet Ultima ZT Series and is the answer not in the manual?

Cub Cadet Ultima ZT Series Specifications

General IconGeneral
BrandCub Cadet
ModelUltima ZT Series
CategoryTractor
LanguageEnglish

Summary

Operators Manual Introduction

Record Product Information

Instructions for recording tractor model and serial number for support.

Safety Warnings Overview

Highlights general safety warnings and Proposition 65 notice.

Safe Operation Practices

General Operation Information

Essential guidance for safe operation and manual reference.

Preparation Before Operating

Steps to take before starting the tractor, including area inspection.

Basic Operating Guidelines

Basic operating procedures and safety advice.

Detailed Operation Safety Rules

Comprehensive safety rules for operation, hazard avoidance.

Child Safety Precautions

Specific warnings and rules for children and tractor operation.

Slope Operation Safety

Guidelines for safe operation on slopes, including angle limits.

Hauling, Towing, and Service Safety

Precautions for hauling, towing, and servicing the tractor.

General Electrical Safety

Safety precautions related to electrical components and shock hazards.

Battery Charger Safety

Guidelines for safely using the battery charger and extension cords.

Battery Safety Precautions

Warnings and guidelines for handling and charging the tractor battery.

Slope Gauge Usage Guide

Instructions on how to use the slope gauge for safe operation.

Safety Symbols and Warnings

Understanding Safety Symbols

Explanation of common safety symbols and their meanings.

Specific Hazard Warnings

Details on specific hazards like thrown objects and amputation.

Additional Safety Symbols Explained

Covers symbols for pinch points, key removal, charging, and service.

Operator Responsibility for Safety

Emphasizes the user's role in safe operation and following instructions.

Assembly Instructions

Moving Tractor and Installing Hitch

Instructions for manually moving the tractor and installing the hitch.

Repositioning Hoop and Installing Seat

Steps to reposition the upper hoop and attach the operator's seat.

Seat Switch and Lapbar Control Adjustment

Connecting seat switch and adjusting lapbar drive control levers.

Attaching Chute Deflector

Instructions for installing the lower discharge chute deflector.

Stop Bracket Removal and Deck Wheels

Removing stop bracket and setting deck wheels for anti-scalp.

Tire Pressure Check and Battery Charging

Procedures for checking tire pressure and charging the battery.

Battery Charging Tips and Notes

Tips and notes on charging the tractor battery.

Seat Adjustment Procedures

Detailed instructions for adjusting the seat using knob or lever.

Tractor Operation

Lapbar Drive Control Levers

Explanation of lapbar control levers for movement and steering.

Deck Height and Lift Pedal Operation

How to adjust deck height and use the deck lift pedal.

Vehicle Control Module (VCM) Overview

Overview of VCM buttons (Start/Stop, PTO, Eco, Headlight).

Multi-Tool Functionality

Description and potential uses of the multi-tool accessory.

Brake Pedal and Parking Brake Operation

Instructions for using the brake pedal and setting the parking brake.

Operator Controls and Features

Details on USB ports, cup holder, storage tray, charging port, and seat lever.

Safety Interlock System Function

Explanation of the safety interlock system and how to check it.

Starting the Tractor Safely

Step-by-step guide to starting the tractor safely.

Driving the Tractor Safely

Instructions for driving the tractor smoothly and safely.

Forward Driving and Stopping

How to drive forward, slow down, and stop using lapbar controls.

Turning and Reverse Driving

Techniques for turning and driving backward safely.

Turning While Driving Rearward

How to turn the tractor while driving backward.

Executing Zero and Pivot Turns

Instructions for performing zero-degree turns and pivot turns.

Operating the PTO

How to engage and disengage the Power Take-Off (PTO) for the cutting deck.

Mowing Best Practices

Tips for effective mowing, including speed, pattern, and grass height.

Service and Maintenance

Maintenance Schedule Overview

A schedule of recommended maintenance tasks and intervals.

Post-Operation Tractor Care

Procedures for caring for the tractor after each use.

Cleaning Tractor and Deck Underside

Instructions for cleaning the tractor exterior and deck underside.

Floor Panel Removal and Tire Care

Steps for removing floor panel and tire maintenance advice.

Deck Lift Pedal and Lubrication Points

Adjusting deck lift pedal and general lubrication points.

Deck Leveling Procedures

How to level the cutting deck side-to-side and front-to-rear.

Adjusting Deck Wheels

Instructions for adjusting deck wheels for anti-scalp function.

Lapbar Drive Control Lever Adjustment

Adjusting lapbar drive control levers for speed synchronization.

Tractor Deck Removal Process

Steps for removing the cutting deck from the tractor.

Deck Disconnection and Reinstallation

Steps for detaching and reattaching the cutting deck.

Blade Maintenance and Removal

Information on blade sharpening, replacement, and removal.

Blade Reinstallation and Off-Season Storage

Procedures for reinstalling blades and preparing for storage.

Battery Storage and Disposal

Guidelines for storing and disposing of the tractor battery.

Troubleshooting Common Problems

A table listing common problems, causes, and remedies.

LCD Screen Messages Explained

Explanations of various messages displayed on the LCD screen.

Fault Codes and Descriptions

Lists common fault codes and their corresponding subsystem descriptions.

Related product manuals