Maintenance Chart
7
20
* Change at the first 50 hours, then again at 500 hours.
^ Change more frequently if unit is operated in extremely dusty conditions.
† Lubricate after each use if unit is run through water deeper than axle.
†† Drain after a deep water crossing (More than 12”).
Maintenance Schedule
Before Each
Use
First 10
Hours
Every 20
Hours/2 mo.
Every 50
Hours
Every 100
Hrs. or Yearly
Every 500
Hrs. or 2 Yrs.
Service
Dates
Check Transfer Case Oil
P
Change Transfer Case Oil*
P
Tighten Wheel Bolts
P
Change Air Filter^
P
Check Engine Coolant Level
P
Change Engine Coolant
P
Inspect Cooling System Hoses
P
Inspect OPS and Seat Belts
P
Inspect Tires
P
Inspect Safety Interlock System
P
Inspect Brakes
P
Inspect Front and Rear Shocks
P
Inspect Ball Joints
P
Lubricate Rear Knuckles †
P
Inspect CV Boots
P
Drain CVT Cover † †
P P
NOTE: For information regarding engine service, see the separate Engine Owner’s Manual included with your unit.
To Next Page
Loading...
