Maintenance & Adjustments
6
21
Maintenance Schedule
Before
Each use
Every
25 Hours
Every
50 Hours
Every
100 Hours
Every
300 Hours
After Mowing
Check Engine Oil/ Gasoline Level
P
Check Hydraulic Transaxles for leaks
P
Check Tires & Tire Pressure
P
Check Deck, Mower and Hydro Drive Belts
P
Check Blades and Blade Bolt Tightness
P
Check Safety Switches for proper Operation
P
Check Engine Intake Screen/Cover
P
Clean Mower
P
Lubricate Wear Points (See Chart)
P P
Clean and Re-oil Air Filter’s Foam Precleaner*
P
Grease three Spindle Bearings
P
Check Fluid Level in Transaxle Expansion Reservoir
P
Replace Air Filter Element*
P
Change Engine Oil† and Replace Oil Filter
P
Check Battery’s Electrolyte Level (If equipped w/fill
caps)
P
Clean Engine Cooling Fins & External Surfaces*
P
Check Spark Plug Condition & Gap
P
Lubricate all grease fittings (See Chart)
P
Check air gap PTO clutch
P
Change Hydrostatic fluid & filter in transaxles
P
† — After first 5 hours, change engine oil & filter. Change oil every 25 hours under heavy duty operation.
To Next Page
Loading...
