Cub Cadet Z-Force LZ

11Section 3 — ASSembly & Set-Up
Adjusting the Seat
 To adjust the position of the seat, push the seat adjustment

2
1
Figure 3-6
2. Slide the seat forward or rearward to the desired position;
then release the adjustment lever. Make sure seat is locked

Transmission Oil Expansion Reservoir
The transmission oil expansion reservoir is connected by hoses
to the RH and LH transmission assemblies, and is located behind
the seat box. The function of the reservoir is to hold the natural
expansion of transmission oil that occurs as the transmission

Under normal operating conditions, no oil should be added



Figure 3-7
NOTE: Prior to the initial operation of the tractor, the
oil level in the reservoir may be slightly higher than the

will eventually purge the air from the lines and the oil level
will settle to the maximum.