Cub Cadet Z-Force S 48 User Manual

26 se c t i O n 7— se r v i c e
Deck Removal
Remove the mower deck from the tractor as follows:

the engine, and set the parking brake.
2.
replace the lock pin in front of pedal in the deck height

Using a  ⁄
towards the back of the tractor and slide the belt off the

4.
and unhook the U-Rod at the nose of the deck.
5.

CAUTION: The deck lift helper springs will cause
the deck lift pedal to slam to the highest position if
the click pin is not in front of the pedal.
6.
underneath the tractor to the right side.
NOTE: It may be easier to place the deck lift pedal in the
transport position when sliding the deck out from underneath
the tractor.
Lowest
Mowing
Position
Highest
Mowing
Position
Lock Pin
Figure 7-3
Idler Pulley
Idler Pulley
Bracket
PTO Pulley
Idler Pulley
Figure 7-4
Cotter
Pin
Figure 7-5

Cub Cadet Z-Force S 48 Specifications

General

Engine Brand	Kohler
Engine Power	24 hp
Cutting Width	48 inches
Fuel Capacity	3.5 gallons
Transmission	Hydro-Gear ZT-2800
Transmission Type	Hydrostatic
Deck Material	Steel
Deck Construction	Fabricated
Deck Material Gauge	10-gauge
Number of Blades	3
Type	Zero-Turn
Cutting Height	1.5 - 4 inches
Warranty	3-year limited