Fig. 15 Fig. 16
Lift up the mountain bike with one hand
Fit the front wheel in the direction it is to rotate
Important: You may need to let some pressure out of the inner
tube to t the front wheel in correctly. A pump is provided for
this. Please read the manufacturer’s recommended tyre pressure
on the tyre!
Important: Make sure, when tting the front wheel,
that the fork dropouts are sitting completely on the axle!
Close the quick release skewer on the hub of the front wheel -
more details about this under Point IV
Attach the left-hand brake calliper onto the quick release
socket (Fig. 17)
Close the quick release on the left-hand brake calliper,
so that the word “Close” is facing outwards (Fig. 18)
Fig. 17 Fig. 18
Important: It is essential that you also read the Magura
Operating Manual!
Important: Check that the front wheel is rotating freely.
The wheel has not been tted properly if the wheel is not
running straight or if the brake is clearly rubbing!
To Next Page
Loading...
