Cuddeback G Series - Battery Installation Procedure

7
Install Baeries
Install baeries by loosening the 2 baery door
thumb screws and opening the baery door. Insert 4
D baeries as shown then secure the baery door
with the thumb screws. Tighten fully but do not
overghten.
Make sure to observe the correct polarity. Baeries
can explode, leak acid, or ignite if inserted
incorrectly.
We recommend Rayovac, Duracell, or Energizer brand
baeries only. (Choose baeries carefully – there is a
dierence, especially in
cold temperatures).
This camera will not
operate with rechargeable
baeries. The baery
voltage is too low.