4
Method One: Using WPS Button
1. Plug the extender next to your router and wait until the LED turns solid on.
2. Press the WPS button on your router, and then press the WPS button on the
extender withing 2 minutes.
3. Then the LED will start to flash, wait until the LED and LED turn solid
on, which means the extender connects to your existing host WiFi network.
If the LED does not turn solid on after 2 minutes, try step 2 again. If still not work, try
Method Two: Using Web Browser, or contact our support@cudy.com.
To Next Page
Loading...
