To Next PageTo Next Page
Need help?Do you have a question about the Cudy WR1000 and is the answer not in the manual?
General| Brand | Cudy |
|---|---|
| Model | WR1000 |
| Category | Wireless Router |
| Language | English |
Connect WAN ports to the internet and LAN ports to computers for network access.
Connect the DC IN port with the power adapter and power on the device.
Restore factory settings or connect to 2.4G network via WPS.
Connect your phone to the router's Wi-Fi network using provided credentials.
Open browser and navigate to 192.168.1.1 to access the router's setup interface.
Select and configure WAN connection type (DHCP or PPPoE) for internet access.
Open browser and navigate to 192.168.1.1 to access the router's setup interface.
Select and configure WAN connection type (DHCP or PPPoE) for internet access.
Verify successful internet connection and Wi-Fi setup after configuration.
Connect the router's LAN port to your computer via a network cable.
Configure the router as a Wi-Fi repeater by selecting network and entering password.
Confirm successful Wi-Fi repeater setup by checking the connection status.
Steps to resolve issues where the device cannot find a Wi-Fi signal from the router.
Instructions on how to perform a factory reset on the router.
Guidance on troubleshooting problems accessing the router's settings page.
Procedure for recovering lost Wi-Fi or login passwords by resetting the router.
Statement on changes, potential interference, and measures to correct it.
Information on FCC radiation exposure limits and installation guidelines.
