Need help?Do you have a question about the Cudy LT400 and is the answer not in the manual?
General| Type | 4G LTE Router |
|---|---|
| Wireless Standards | IEEE 802.11b/g/n |
| Frequency | 2.4GHz |
| Wireless Speed | 300Mbps |
| SIM Slot | Yes |
| SIM Card Type | Standard SIM |
| Power Supply | 12V/1A |
| Operating Temperature | 0°C to 40°C |
| Antenna | 2 x 5dBi antennas |
| Ports | 1 x 10/100Mbps WAN/LAN Port |
| Button | Reset button |
| Security | WPA-PSK / WPA2-PSK |
| Storage Temperature | 70°C |
| Operating Humidity | 10% to 90% non-condensing |
| Storage Humidity | 5% to 90% non-condensing |
Insert the standard SIM card into the router slot until a click is heard.
Connect the power adapter, turn on the router, wait for it to start, and check the LED status indicators.
Check the 4G information card on the status page to confirm successful internet connection.
Follow Quick Setup for customization or if the 4G connection is not established.
Connect the router via Ethernet cable or Wi-Fi using the network name and password printed on the router.
Launch a web browser and enter http://cudy.net/ or http://192.168.10.1/ to log in.
Enter the SIM card PIN code if prompted and click Save & Apply to connect to the internet.
Steps to resolve issues accessing the router's web management page, including IP settings and browser checks.
Instructions for restoring the router to its factory default settings via the RST/WPS button or web interface.
To Next Page
