Need help?Do you have a question about the Cudy LT500 and is the answer not in the manual?
General| DSL WAN | No |
|---|---|
| Ethernet WAN | Yes |
| WAN connection type | RJ-45 |
| Wi-Fi band | Dual-band (2.4 GHz / 5 GHz) |
| Wi-Fi standards | 802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac) |
| Top Wi-Fi standard | Wi-Fi 5 (802.11ac) |
| WLAN data transfer rate (max) | 867 Mbit/s |
| WLAN data transfer rate (first band) | 300 Mbit/s |
| VPN support | PPTP/L2TP/OpenVPN/WireGuard/IPsec/Zerotier |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Ethernet LAN interface type | Fast Ethernet |
| 4G standard | LTE-TDD & LTE-FDD |
| 2G standards | EDGE, GSM |
| 3G standards | WCDMA |
| SIM card type | NanoSIM |
| Mobile network generation | 4G |
| Ethernet LAN (RJ-45) ports | 4 |
| Security algorithms | WEP, WPA, WPA-PSK, WPA2, WPA2-PSK |
| Product type | Tabletop router |
| Product color | Black |
| LED indicators | Link, Power |
| Antenna gain level (max) | 5 dBi |
| Flash memory | 16 MB |
| Internal memory | 128 MB |
| Power source type | DC |
| Browser supported | Internet Explorer 11, Firefox 12.0, Chrome 20.0, Safari 4.0 |
| Mac operating systems supported | MacOS |
| Windows operating systems supported | Windows 10, Windows 2000, Windows 7, Windows 8, Windows 98SE, Windows Vista, Windows XP |
| Cables included | LAN (RJ-45) |
| Package type | Box |
| Number of products included | 1 pc(s) |
Insert the Micro SIM card into the slot until you hear a click.
Connect the power adapter, turn on the router, and check the system LED status.
Connect the router via Ethernet or Wi-Fi and log in to the web interface using admin credentials.
Enter the SIM card PIN code if prompted to unlock the SIM and connect to the internet.
Describes the indication for System LED status: Red (not connected), Blue (4G/WAN connected), Purple (2/3G connected).
Details Ethernet LED connection status and functions of WPS and Reset buttons.
Steps to resolve issues accessing the router's web management page.
Instructions on how to reset the router to its factory default settings.
To Next Page
