1. Insert the Standard SIM card into the slot until you hear a click.
Quick Installation
3. Check the following LEDs’ status.
1. Connect the router via ethernet cable or Wi-Fi. Network name and
password is printed on the bottom of the router.
If internet LED is off, please follow the instructions of Customize The 4G Router.
2. Connect power adapter and turn on the router. Waiting for 2 minutes for
it to start.
EN
If Internet LED is on , means connected to the internet successfully.
POWERINTERNET
LAN1
LAN2
LAN3Wi-Fi4G
WAN/LAN
2. Launch a web browser and enter http://cudy.net/ (or http://192.168.10.1/)
in the address bar, use admin as password to login.
3. Below page would pop up if your SIM card needs PIN to unlock. Please
enter your PIN and click Save & Apply, then wait 15 seconds to connect
to the Internet.
Log In
admin
Auto
Password
4G Settings
The SIM is locked, please enter the PIN code. You have
3 attempts at most for entering the PIN code.
PIN
Save & Apply
Customize The 4G Router
4G LTE N300 Wi-Fi Router
Wi-Fi: Cudy-XXXX
Wi-Fi Password: XXXXXXXX
http://cudy.net/
— 1 — — 2 —
SIM card requirement
Micro sim adapterMicro sim card
Standard sim card
Nano sim adapterNano sim card Standard sim card
WAN/LAN LAN1 LAN2 LAN3 USB SIM Card PWR
21
Standard SIM
To Next Page
Loading...
Need help?
General
