Need Help?
Q1. What should I do if I cannot access the web management page?
A1: If the computer is set to a static IP address, change its settings to obtain an IP
address automatically.
A2: Make sure http://cudy.net/ or http://192.168.10.1/ is correctly entered in the
web browser.
A3: Use another web browser and try again.
A4: Reboot your router and try again.
A5: Disable and enable the active network adapter in use.
Q2. How do I restore the router to its factory default settings?
A1: With the router powered on, press and hold the RST/WPS button for 5 seconds
before release. Wait the router resets.
A2: Log in to the web management page of the router, and go to
Advanced Settings >Reset , click Perform Reset and wait until the reset process is
complete.
EN
4. Then please check 4G information card of the status page. If the status
is connected, means connected to the internet successfully.
Status
RSSI
Upload / Download
Connected
22
770.63KB / 681.69KB
4G
More Details
Status
RSSI
Upload / Download
Not connected
-
0.00 B / 0.00 B
4G
More Details
Connected Not connected
Enjoy the internet!
LED and Button
Item Status Explanation
On/Off
On
Off
On
Flash
Off
On
Flash
Off
On
Flash
Off
On
Off
POWER
INTERNET
WAN / LAN
LAN 1-LAN 3
Wi-Fi
4G
RST/WPS
Power on / Power off
Internet is connected
Internet is not connected
Connected
Transmitting
Disconnected
Connected
Transmitting
Disconnected
Wi-Fi is enable
Transmitting
Wi-Fi is disable
4G module is powered
4G module is not powered
LED
Button
1 second for WPS, 5 seconds for Reset
— 3 — — 4 —
5. If 4G is not connected, or if you want to customize the router yourself,
click "Quick Setup" and follow the step-by-step instructions to config-
ure the router.
Note：
1, If you are not sure about APN parameters, please contact your internet provider.
2, If you meet any other problems, don't hesitate to contact our technical support
team: support@cudy.com
Internet
Work Mode
Model
Not connected
4G Router
LT400
Status
Quick Setup
To Next Page
Loading...
Need help?
General
